Plastic Modular Belts - Side Flex Belts and Modular Conveyor Belts from ultraplastindia.com

Side Flex Belts

We are offering a wide range of Side Flex Belts in varied models, such as USF-25 and USF-50. These belts can bend in all directions that results in enhancing the conveyor design possibilities. Our flex belts are offered with different pitch dimensions like 25 mm and 50 mm as per the application requirements. Moreover, these belts are manufactured using Acetal that has temperature ranging capacity of -25 �C to +95 �C and hence, these belts have maximum tensile load of 1600 kg. Available with the turning radius (innermost) of 2.8 times of the belt width, these belts are extensively used in various industries for conveying purposes. In addition, our range is available in UHMWPE that is a low-friction polymer along with guide strips that facilitates it for smooth travel.

Moreover, the straight line and curved conveyor sections, side flex belts can be combined into a single section resulting in smoother conveying and better cost efficiency. We provide Plastic Modular Belts, side flex belts, rubber conveyor belts, cleated conveyor belts at competitive prices.

USF 25

Side Flex Belts

Code : USF 25 (Pitch=25mm)

Side flex modular belts USF 25 and USF 50 can bend in all directions resulting in enhanced conveyor design possibilities. Straight line and curved conveyor sections can be combined into a single section resulting in savings at many fronts.

Features

MOC	:	Acetal (-25 to +95 deg C); Max Tensile Load: 400 kg PP (+1 to +105 deg C); Max. Tensile Load: 250 kg
Pin Dia	:	5mm Nylon/Acetal
Approx. Turning Radius (Innermost)	:	2.2 times the belt width
Widths available	:	100mm to 600mm (Exact widths available on request)
Drive Sprockets	:	12 Teeth (0D = 97mm, Bore = 25mm round or 40x40mm SQ) 16 teeth (OD = 130mm, Bore = 25mm round or 40x40mm SQ) 20 teeth (OD = 160mm, Bore = 40x40mm or 65x65mm SQ)
Accessories	:	Vertical Flights in ht. = 5,10,15, 25, 50 & 75mm Side Walls ht. = 50 and 75mm
Drive Sprockets	:	12 Teeth (OD = 96mm and bore = 25mm round or 40x40mm SQ) 16 Teeth (OD = 130mm and bore = 25mm round or 40x40mm SQ) 20 Teeth (OD = 162mm and bore = 25mm round or 40x40mm SQ)

Send Enquiry

USF 50

Side Flex Belts

Code : USF 50 (Pitch=50mm)

Features

MOC	:	Acetal (-25 to +95 deg C); Max.Tensile Load: 600 kg PP (+1 to +105 deg C); Max. Tensile Load: 300 kg
Pin Dia	:	6mm SS 304
Approx. Turning Radius (Innermost)	:	2.6 times the belt width
Widths available	:	100mm to 900mm (exact widths available on request)
Drive Sprockets	:	8 Teeth (OD = 130mm and bore = 25mm round or 40x40mm SQ) 10 Teeth (OD = 161 mm and bore = 40x40mm or 65x65mm SQ) 12 Teeth (OD = 192mm and bore = 40x40mm or 65x65mm SQ)

Send Enquiry

Product Range